ADD_DRV(8) Maintenance Procedures ADD_DRV(8)


add_drv - add a new device driver to the system


add_drv [-b basedir] [-c class_name]
[-i 'identify_name...'] [-m 'permission','...']
[-p 'policy'] [-P privilege] [-n] [-f] [-v] device_driver


The add_drv command is used to inform the system about newly installed
device drivers.

Each device on the system has a name associated with it. This name is
represented by the name property for the device. Similarly, the device
may also have a list of driver names associated with it. This list is
represented by the compatible property for the device.

The system determines which devices will be managed by the driver being
added by examining the contents of the name property and the compatible
property (if it exists) on each device. If the value in the name property
does not match the driver being added, each entry in the compatible
property is tried, in order, until either a match occurs or there are no
more entries in the compatible property.

In some cases, adding a new driver may require a reconfiguration boot.
See the NOTES section.

Aliases might require quoting (with double-quotes) if they contain
numbers. See EXAMPLES.

The /etc/minor_perm File
add_drv and update_drv(8) read the /etc/minor_perm file to obtain
permission information. The permission specified is applied to matching
minor nodes created when a device bound to the driver is attached. A
minor node's permission may be manually changed by chmod(1). For such
nodes, the specified permissions apply, overriding the default
permissions specified via add_drv or update_drv(8).

The format of the /etc/minor_perm file is as follows:

name:minor_name permissions owner group

minor_name may be the actual name of the minor node, or contain shell
metacharacters to represent several minor nodes (see sh(1)).

For example:

sd:* 0640 root sys
zs:[a-z],cu 0600 uucp uucp
mm:kmem 0640 root bin

The first line sets all devices exported by the sd node to 0640
permissions, owned by root, with group sys. In the second line, devices
such as a,cu and z,cu exported by the zs driver are set to 0600
permission, owned by uucp, with group uucp. In the third line the kmem
device exported by the mm driver is set to 0640 permission, owned by
root, with group bin.

Running add_drv from a postinstall Script
When running add_drv from within the context of a legacy SVR4 package's
postinstall script, you must consider whether the package is being added
to a system image or to a running system. When a package is being
installed on a system image, the BASEDIR variable refers to the image's
base directory. In this situation, add_drv should be invoked with -b
$BASEDIR. This causes add_drv only to update the image's system files; a
reboot of the system or client would be required to make the driver

When a package is being installed on the running system itself, the
system files need to be updated, as in the case above. However, the
running kernel can be informed of the existence of the new driver without
requiring a reboot. To accomplish this, the postinstall script must
invoke add_drv without the -b option. Accordingly, postinstall scripts
invoking add_drv should be written thusly:

if [ "${BASEDIR:=/}" = "/" ]
ADD_DRV="add_drv -b ${BASEDIR}"
$ADD_DRV [<options>] <driver>

...or, alternatively:

if [ "${BASEDIR:=/}" != "/" ]
add_drv $BASEDIR_OPT [<options>] <driver>

The -b option is described below.


-b basedir
Installs the driver on the system with a root
directory of basedir rather than installing on
the system executing add_drv. This option was
typically used in package post-installation
scripts. The system using basedir as its root
directory must reboot to complete the driver

Note -

The root file system of any non-global zones
must not be referenced with the -b option.
Doing so might damage the global zone's file
system, might compromise the security of the
global zone, and might damage the non-global
zone's file system. See zones(7).

-c class_name
The driver being added to the system exports
the class class_name.

Normally if a reconfiguration boot is required
to complete the configuration of the driver
into the system, add_drv will not add the
driver. The force flag forces add_drv to add
the driver even if a reconfiguration boot is
required. See the -v flag.

-i 'identify_name'
A white-space separated list of aliases for the
driver device_driver.

-m 'permission'
Specify the file system permissions for device
nodes created by the system on behalf of

Do not try to load and attach device_driver,
just modify the system configuration files for
the device_driver.

-p 'policy'
Specify an additional device security policy.

The device security policy constists of several
whitespace separated tokens:

{minorspec {token=value}+}+

minorspec is a simple wildcard pattern for a
minor device. A single * matches all minor
devices. Only one * is allowed in the pattern.

Patterns are matched in the following order:

o entries without a wildcard

o entries with wildcards, longest
wildcard first
The following tokens are defined: read_priv_set
and write_priv_set. read_priv_set defines the
privileges that need to be asserted in the
effective set of the calling process when
opening a device for reading. write_priv_set
defines the privileges that need to be asserted
in the effective set of the calling process
when opening a device for writing. See

A missing minor spec is interpreted as a *.

-P 'privilege'
Specify additional, comma separated, privileges
used by the driver. You can also use specific
privileges in the device's policy.

The verbose flag causes add_drv to provide
additional information regarding the success or
failure of a driver's configuration into the
system. See the EXAMPLES section.


Example 1: Adding SUNW Example Driver to the System

The following example adds the SUNW,example driver to a 32-bit system,
with an alias name of SUNW,alias. It assumes the driver has already been
copied to /usr/kernel/drv.

example# add_drv -m '* 0666 bin bin','a 0644 root sys' \
-p 'a write_priv_set=sys_config * write_priv_set=none' \
-i 'SUNW,alias' SUNW,example

Every minor node created by the system for the SUNW,example driver will
have the permission 0666, and be owned by user bin in the group bin,
except for the minor device a, which will be owned by root, group sys,
and have a permission of 0644. The specified device policy requires no
additional privileges to open all minor nodes, except minor device a,
which requires the sys_config privilege when opening the device for

Example 2: Adding Driver to the Client /export/root/sun1

The following example adds the driver to the client /export/root/sun1.
The driver is installed and loaded when the client machine, sun1, is
rebooted. This second example produces the same result as the first,
except the changes are on the diskless client, sun1, and the client must
be rebooted for the driver to be installed.

example# add_drv -m '* 0666 bin bin','a 0644 root sys' \
-i 'SUNW,alias' -b /export/root/sun1 \

See the note in the description of the -b option, above, specifying the
caveat regarding the use of this option with the Solaris zones feature.

Example 3: Adding Driver for a Device Already Managed by an Existing


The following example illustrates the case where a new driver is added
for a device that is already managed by an existing driver. Consider a
device that is currently managed by the driver dumb_framebuffer. The name
and compatible properties for this device are as follows:

compatible="whizzy_framebuffer", "dumb_framebuffer"

If add_drv is used to add the whizzy_framebuffer driver, the following
will result.

example# add_drv whizzy_framebuffer
Error: Could not install driver (whizzy_framebuffer)
Device managed by another driver.

If the -v flag is specified, the following will result.

example# add_drv -v whizzy_framebuffer
Error: Could not install driver (whizzy_framebuffer)
Device managed by another driver.
Driver installation failed because the following
entries in /devices would be affected:

(Device currently managed by driver "dumb_framebuffer")

The following entries in /dev would be affected:


If the -v and -f flags are specified, the driver will be added resulting
in the following.

example# add_drv -vf whizzy_framebuffer
A reconfiguration boot must be performed to complete the
installation of this driver.

The following entries in /devices will be affected:

(Device currently managed by driver "dumb_framebuffer"

The following entries in /dev will be affected:


The above example is currently only relevant to devices exporting a
generic device name.

Example 4: Use of Double Quotes in Specifying Driver Alias

The following example shows the use of double quotes in specifying a
driver alias that contains numbers.

example# add_drv -i '"pci10c5,25"' smc


add_drv returns 0 on success and 1 on failure.



32-bit boot device drivers


64-bit SPARC boot device drivers


64-bit x86 boot device drivers


other 32-bit drivers that could potentially be shared between


other 64-bit SPARC drivers that could potentially be shared between


other 64-bit x86 drivers that could potentially be shared between

/platform/`uname -i`/kernel/drv

32-bit platform-dependent drivers

/platform/`uname -i`/kernel/drv/sparcv9

64-bit SPARC platform-dependent drivers

/platform/`uname -i`/kernel/drv/amd64

64-bit x86 platform-dependent drivers


driver aliases file


driver classes file


minor node permissions


major number binding


device policy


device privileges


chmod(1), devfs(4FS), driver.conf(5), system(5), attributes(7),
privileges(7), boot(8), devfsadm(8), kernel(8), modinfo(8), rem_drv(8),
update_drv(8), ddi_create_minor_node(9F)


It is possible to add a driver for a device already being managed by a
different driver, where the driver being added appears in the device's
compatible list before the current driver. In such cases, a
reconfiguration boot is required (see boot(8) and kernel(8)). After the
reconfiguration boot, device links in /dev and references to these files
may no longer be valid (see the -v flag). If a reconfiguration boot would
be required to complete the driver installation, add_drv will fail unless
the -f option is specified. See Example 3 in the EXAMPLES section.

With the introduction of the device policy several drivers have had their
minor permissions changed and a device policy instated. The typical
network driver should use the following device policy:

add_drv -p 'read_priv_set=net_rawaccess\
write_priv_set=net_rawaccess' -m '* 666 root sys'\

This document does not constitute an API. /etc/minor_perm,
/etc/name_to_major, /etc/driver_classes, and /devices may not exist or
may have different contents or interpretations in a future release. The
existence of this notice does not imply that any other documentation that
lacks this notice constitutes an API.

/etc/minor_perm can only be updated by add_drv(8), rem_drv(8) or

In the current version of add_drv, the use of double quotes to specify an
alias is optional when used from the command line. However, when using
add_drv from packaging scripts, you should continue to use double quotes
to specify an alias.


Previous versions of add_drv accepted a pathname for device_driver. This
feature is no longer supported and results in failure.

May 13, 2017 ADD_DRV(8)