illumos: manual page: qlc.4d

QLC(4D) QLC(4D)

NAME

qlc - ISP2200, ISP2300, and SP212 Family Fibre Channel host bus adapter
driver.

SYNOPSIS

SUNW,qlc

DESCRIPTION

The qlc host bus adapter driver is a Sun Fibre Channel transport layer-
compliant nexus driver for the Qlogic ISP2200, ISP2200A, ISP2310,
ISP2312, and SP212 adapters. These adapters support Fibre Channel SCSI
and IP Protocols, FC-AL public loop profile, point-to-point fabric
connection and Fibre Channel service classes two and three (see NOTES
section below).

The qlc driver interfaces with the Sun Fibre Channel transport layer to
support the standard functions provided by the SCSA interface. It
supports auto request sense and tagged queueing by default. The driver
requires that all devices have unique hard addresses in private loop
configurations. Devices with conflicting hard addresses are not
accessible.

FILES

/kernel/drv/qlc
32-bit ELF kernel module (x86)

/kernel/drv/amd64/qlc
64-bit ELF kernel module (x86)

/kernel/drv/sparcv9/qlc
64-bit ELF kernel module (SPARC)

/kernel/drv/qlc.conf
Driver configuration file

ATTRIBUTES

fcp(4D), fp(4D), driver.conf(5), prtconf(8)

Writing Device Drivers

ANSI X3.230:1994, Fibre Channel Physical Signaling (FC-PH)

Project 1134-D, Fibre Channel Generic Services (FC-GS-2)

ANSI X3.269-1996, Fibre Channel Arbitrated Loop (FC-AL)

ANSI X3.270-1996, Fibre Channel Protocol for SCSI (FCP-SCSI)

ANSI X3.270-1996, SCSI-3 Architecture Model (SAM)

Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA)

Fabric Loop Attachment (FC-FLA)

ISP2200 Firmware Interface Specification, QLogic Corporation

ISP2300 Series Firmware Specification, QLogic Corporation

NOTES