SCSI(4) File Formats and Configurations SCSI(4)


NAME


scsi - configuration files for SCSI target drivers

DESCRIPTION


The architecture of the Solaris SCSI subsystem distinguishes two types of
device drivers: SCSI target drivers, and SCSI host adapter drivers.
Target drivers like sd(7D) and st(7D) manage the device on the other end
of the SCSI bus. Host adapter drivers manage the SCSI bus on behalf of
all the devices that share it.


Drivers for host adapters provide a common set of interfaces for target
drivers. These interfaces comprise the Sun Common SCSI Architecture (
SCSA) which are documented as part of the Solaris DDI/DKI. See
scsi_ifgetcap(9F), scsi_init_pkt(9F), and scsi_transport(9F) for further
details of these, and associated routines.


Depending on the interconnect (transport), SCSI target devices are either
self-identifying or rely on driver.conf(4) entries to be recognized by
the system. For self-identifying target devices the driver binding is
chosen based on the IEEE-1275 like 'compatible' forms of the target
devices. Currently the Fibre Channel interconnects, fcp(7D), ifp(7D),
scsi_vhci(7D), sf(7D), and the SATA framework drivers (see sata(7D)) are
self-identifying. You must specify other possible interconnects target
devices by using the target driver driver.conf(4) configuration files.

Self-Identifying
Host adapter drivers of class scsi-self-identifying that dynamically
create self-identifying target device children establish a compatible
property on each child. The compatible property is an ordered array of
strings, each string is a compatible form. High precedence forms are
defined first. For a particular device, the highest precedence form that
has an established driver alias selects the driver for the device. Driver
associations to compatible forms, called aliases, are administered by way
of add_drv(1M), update_drv(1M), and rem_drv(1M) utilities.


The forms for self-identifying SCSI target devices are derived from the
SCSI target device's INQUIRY data. A diverse set of forms is defined,
allowing for flexibility in binding.


From the SCSI INQUIRY data, three types of information are extracted:
scsi_dtype, flag bits, and SCSI_ASCII vendor product revision.


The scsi_dtype is the first component of most forms. It is represented as
two hex digits. For nodes that represent embedded secondary functions,
such as an embedded enclosure service or media changer, additional forms
are generated that contain the dtype of the secondary function followed
by the dtype of the device in which the secondary function is embedded.


For forms that use flag bits, all applicable flags are concatenated (in
alphabetical order) into a single flags string. Removable media is
represented by a flag. For forms that use the SCSI_ASCII INQUIRY vendor,
product, and revision fields, a one-way conversion algorithm translates
SCSI_ASCII to a IEEE 1275 compatible string.


It is possible that a device might change the INQUIRY data it returns
over time as a result of a device initialization sequence or in response
to out-of-band management. A device node's compatible property is based
on the INQUIRY data when the device node was created.


The following forms, in high to low precedence order, are defined for
SCSI target device nodes.

scsiclass,DDEEFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR (1 *1&2)
scsiclass,DDEE.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR (2 *1)
scsiclass,DDFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR (3 *2)
scsiclass,DD.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR (4)
scsiclass,DDEEFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP (5 *1&2)
scsiclass,DDEE.vVVVVVVVV.pPPPPPPPPPPPPPPPP (6 *1)
scsiclass,DDFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP (7 *2)
scsiclass,DD.vVVVVVVVV.pPPPPPPPPPPPPPPPP (8)
scsiclass,DDEEFFF (9 *1&2)
scsiclass,DDEE (10 *1)
scsiclass,DDFFF (11 *2)
scsiclass,DD (12)
scsiclass (13)
*1 only produced on a secondary function node
*2 only produced on a node with flags


where:

v
Is the letter v. Denotes the beginning of VVVVVVVV.


VVVVVVVV
Translated scsi_vendor: SCSI standard INQUIRY data
"Vendor identification" SCSI_ASCII field (bytes
8-15).


p
Is the letter p. Denotes the beginning of
PPPPPPPPPPPPPPPP.


PPPPPPPPPPPPPPPP
Translated scsi_product: SCSI standard INQUIRY data
"Product identification" SCSI_ASCII field (bytes
16-31).


r
Is the letter r. Denotes the beginning of RRRR.


RRRR
Translated scsi_revision: SCSI standard INQUIRY data
"Product revision level" SCSI_ASCII field (bytes
32-35).


DD
Is a two digit ASCII hexadecimal number. The value of
the two digits is based one the SCSI "Peripheral
device type" command set associated with the node. On
a primary node this is the scsi_dtype of the primary
command set; on a secondary node this is the
scsi_dtype associated with the embedded function
command set.


EE
Same encoding used for DD. This form is only
generated on secondary function nodes. The DD
function is embedded in an EE device.


FFF
Concatenation, in alphabetical order, of the flag
characters below. The following flag characters are
defined:

R
Removable media: Used when scsi_rmb is set

Forms using FFF are only be generated if there are
applicable flag characters.


Solaris might create additional compatible forms not described. These
forms are for Solaris internal use only. Any additional use of these
forms is discouraged. Future releases of Solaris might not produce these
forms.

driver.conf
Configuration files for SCSI target drivers should identify the host
adapter driver implicitly using the class keyword to remove any
dependency on the particular host adapter involved.


All host adapter drivers of class scsi recognize the following
properties:

target
Integer-valued SCSI target identifier that this driver claims.


lun
Integer-valued SCSI logical unit number ( LUN) that this driver
claims.


All SCSI target driver configuration file device definitions except stub
device definitions for discovery of devid must provide target and lun
properties. These properties are used to construct the address part of
the device name under /devices. The stub device definitions for discovery
of devid must be able to specify or imply the host adapter drivers that
might have children that bind to the target driver. So all SCSI target
driver configuration file stub device definitions must be defined by
property class or parent.


The SCSI target driver configuration files shipped with Solaris have
entries for LUN 0 only. For devices that support other LUNs, such as some
CD changers, the system administrator can edit the driver configuration
file to add entries for other LUNs.

EXAMPLES


Example 1: An Example Configuration File for a SCSI Target Driver




The following is an example configuration file for a SCSI target driver
called toaster.conf.


#
# Copyright (c) 1992, by Sun Microsystems, Inc.
#
#ident "@(#)toaster.conf 1.2 92/05/12 SMI"
name="toaster" class="scsi" target=4 lun=0;


Add the following lines to sd.conf for a six- CD changer on target 3,
with LUNs 0 to 5.


name="sd" class="scsi" target=3 lun=1;
name="sd" class="scsi" target=3 lun=2;
name="sd" class="scsi" target=3 lun=3;
name="sd" class="scsi" target=3 lun=4;
name="sd" class="scsi" target=3 lun=5;


It is not necessary to add the line for LUN 0, as it already exists in
the file shipped with Solaris.


Example 2: A Stub Device Definition of sd.conf




The following line is a stub device definition which implies the host
adapter drivers of class scsi-self-identifying might have children that
bind to the sd(7D) driver:


name="sd" class="scsi-self-identifying";


ATTRIBUTES


See attributes(5) for descriptions of the following attributes:


+--------------------+-----------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+--------------------+-----------------+
|Interface Stability | Committed |
+--------------------+-----------------+

SEE ALSO


add_drv(1M), rem_drv(1M), update_drv(1M), driver.conf(4), attributes(5),
fcp(7D), ifp(7D), sata(7D), scsi_vhci(7D), sd(7D), sf(7D), st(7D),
scsi_ifgetcap(9F), scsi_init_pkt(9F), scsi_transport(9F)


Writing Device Drivers


ANS X3T9.2/82-2 SMALL COMPUTER SYSTEM INTERFACE (SCSI-1)


ANS X3T9.2/375D Small Computer System Interface - 2 (SCSI-2)


ANS X3T10/994D SCSI-3 Architecture Model (SAM)


IEEE 1275 SCSI Target Device Binding

NOTES


With driver.conf(4) configuration, you need to ensure that the target and
lun values claimed by your target driver do not conflict with existing
target drivers on the system. For example, if the target is a direct
access device, the standard sd.conf file usually makes sd claim it before
any other driver has a chance to probe it.


May 30, 2008 SCSI(4)