ZONEADM(1M) Maintenance Commands ZONEADM(1M)


NAME


zoneadm - administer zones

SYNOPSIS


zoneadm -z zonename [-u uuid-match] subcommand
[subcommand_options]


zoneadm [-R root] [-z zonename] [-u uuid-match] list
[list_options]


zoneadm [-R root] -z zonename [-u uuid-match] mark incomplete


DESCRIPTION


The zoneadm utility is used to administer system zones. A zone is an
application container that is maintained by the operating system runtime.

SECURITY


Once a process has been placed in a zone other than zone 0, the process
or any of its children cannot change zones.

OPTIONS


The following options are supported:

-R root

Specify an alternate root (boot environment). This option can only be
used in conjunction with the "list" and "mark" subcommands.


-u uuid-match

Unique identifier for a zone, as assigned by libuuid(3LIB). If this
option is present and the argument is a non-empty string, then the
zone matching the UUID is selected instead of the one named by the -z
option, if such a zone is present.


-z zonename

String identifier for a zone.


SUBCOMMANDS


Subcommands which can result in destructive actions or loss of work have
a -F flag to force the action. If input is from a terminal device, the
user is prompted if such a command is given without the -F flag;
otherwise, if such a command is given without the -F flag, the action is
disallowed, with a diagnostic message written to standard error. If a
zone installation or uninstallation is interrupted, the zone is left in
the incomplete state. Use uninstall to reset such a zone back to the
configured state.


The following subcommands are supported:

attach [-F] [-n path] [brand-specific options]

The attach subcommand takes a zone that has been detached from one
system and attaches the zone onto a new system. Therefore, it is
advised (though not required) that the detach subcommand should be
run before the "attach" takes place. Once you have the new zone in
the configured state, use the attach subcommand to set up the zone
root instead of installing the zone as a new zone.

The -F option can be used to force the zone into the "installed"
state with no validation. This option should be used with care since
it can leave the zone in an unsupportable state if it was moved from
a source system to a target system that is unable to properly host
the zone. The -n option can be used to run the attach subcommand,
without executing the command. It uses the output of the "detach -n"
subcommand as input and is useful to identify any conflicting issues,
such as the network device being incompatible, and can also determine
whether the host is capable of supporting the zone. The path can be
"-", to read the input from standard input.

The zone's brand may include additional options that govern how the
zone will be attached. See brands(5) for specific brand information.

The zone being attached must first be configured using the zonecfg
(see zonecfg(1M)) command. This does not apply when running "attach
-n".

Use the following command to attach a zone:

# zoneadm -z my-zone attach


boot [-- boot_options]

Boot (or activate) the specified zones.

The following boot_options are supported:

-i altinit

Select an alternative executable to be the primordial Process.
altinit is a valid path to an executable. The default primordial
process is init(1M).


-m smf_options

The smf_options include two categories of options to control
booting behavior of the service management facility: recovery
options and messages options.

Message options determine the type and amount of messages that
smf(5) displays during boot. Service options determine the
services which are used to boot the system. See kernel(1M) for a
listing of the -m suboptions.


-s

Boots only to milestone svc:/milestone/single-user:default. This
milestone is equivalent to init level s. See svc.startd(1M) and
init(1M).


clone [-m copy] [-s zfs_snapshot] source_zone

Install a zone by copying an existing installed zone. This subcommand
is an alternative way to install the zone.

-m copy

Force the clone to be a copy, even if a "ZFS clone" is possible.


-s zfs_snapshot

Specify the name of a ZFS snapshot to use as the source of the
clone. The snapshot must be a snapshot of the source zone taken
from a previous "zoneadm clone" installation.

The source zone must be halted before this subcommand can be used.


detach [-n]

Detach the specified zone. Detaching a zone is the first step in
moving a zone from one system to another. The full procedure to
migrate a zone is that the zone is detached, the zonepath directory
is moved to the new host, and then the zone is attached on the new
host. Once the zone is detached, it is left in the configured state.
If you try to install or clone to a configured zone that has been
detached, you will receive an error message and the install or clone
subcommand will not be allowed to proceed. The -n option can be used
to run the detach subcommand, without executing the command. This
generates the information needed for running the "attach -n"
subcommand, which is useful to identify any conflicting issues, such
as the network device being incompatible or if the host is capable of
supporting the zone. The information is sent to standard output and
can be saved to a file or piped to the "attach -n" subcommand.

Use the following command to detach a zone:

# zoneadm -z my-zone detach


The source zone must be halted before this subcommand can be used.


halt

Halt the specified zones. halt bypasses running the shutdown scripts
inside the zone. It also removes run time resources of the zone.


help [subcommand]

Display general help. If you specify subcommand, displays help on
subcommand.


install [-x nodataset] [brand-specific options]

Install the specified zone on the system. This subcommand
automatically attempts to verify first, most verification errors are
fatal. See the verify subcommand.

-x nodataset

Do not create a ZFS file system.

The zone's brand may include additional options that govern how the
software will be installed in the zone. See brands(5) for specific
brand information.


list [list_options]

Display the name of the current zones, or the specified zone if
indicated.

By default, all running zones are listed. If you use this subcommand
with the zoneadm -z zonename option, it lists only the specified
zone, regardless of its state. In this case, the -i and -c options
are disallowed.

If neither the -i or -c options are given, all running zones are
listed.

The following list_options are supported:

-c

Display all configured zones. This option overrides the -i
option.


-i

Expand the display to all installed zones.


-p

Request machine parsable output. The output format is a list of
lines, one per zone, with colon- delimited fields. These fields
are:

zoneid:zonename:state:zonepath:uuid:brand:ip-type


If the zonepath contains embedded colons, they can be escaped by
a backslash (""), which is parsable by using the shell read(1)
function with the environmental variable IFS. The uuid value is
assigned by libuuid(3LIB) when the zone is installed, and is
useful for identifying the same zone when present (or renamed) on
alternate boot environments. Any software that parses the output
of the "zoneadm list -p" command must be able to handle any
fields that may be added in the future.

The -v and -p options are mutually exclusive. If neither -v nor
-p is used, just the zone name is listed.


-v

Display verbose information, including zone name, id, current
state, root directory, brand type, ip-type, and options.

The -v and -p options are mutually exclusive. If neither -v nor
-p is used, just the zone name is listed.


mark incomplete

Change the state of an installed zone to "incomplete." This command
may be useful in cases where administrative changes on the system
have rendered a zone unusable or inconsistent. This change cannot be
undone (except by uninstalling the zone).


move new_zonepath

Move the zonepath to new_zonepath. The zone must be halted before
this subcommand can be used. The new_zonepath must be a local file
system and normal restrictions for zonepath apply.


ready

Prepares a zone for running applications but does not start any user
processes in the zone.


reboot [-- boot_options]]

Restart the zones. This is equivalent to a halt boot sequence. This
subcommand fails if the specified zones are not active. See boot
subcommand for the boot options.


shutdown [-r [-- boot_options]]

Gracefully shutdown the specified zone. This subcommand waits for all
zone processes to finish; the default timeout is SCF_PROPERTY_TIMEOUT
value from the SMF service system/zones. If the -r option is
specified, reboot the zone. See boot subcommand for the boot options.


uninstall [-F]

Uninstall the specified zone from the system. Use this subcommand
with caution. It removes all of the files under the zonepath of the
zone in question. You can use the -F flag to force the action.


verify

Check to make sure the configuration of the specified zone can safely
be installed on the machine. Following is a break-down of the checks
by resource/property type:

zonepath

zonepath and its parent directory exist and are owned by root
with appropriate modes . The appropriate modes are that zonepath
is 700, its parent is not group or world-writable and so forth.
zonepath is not over an NFS mount. A sub-directory of the
zonepath named "root" does not exist.

If zonepath does not exist, the verify does not fail, but merely
warns that a subsequent install will attempt to create it with
proper permissions. A verify subsequent to that might fail should
anything go wrong.

zonepath cannot be a symbolic link.


fs

Any fs resources have their type value checked. An error is
reported if the value is one of proc, mntfs, autofs, or nfs or
the filesystem does not have an associated mount binary at
/usr/lib/fs/<fstype>/mount.

It is an error for the directory to be a relative path.

It is an error for the path specified by raw to be a relative
path or if there is no fsck binary for a given filesystem type at
/usr/lib/fs/<fstype>/fsck. It is also an error if a corresponding
fsck binary exists but a raw path is not specified.


net

All physical network interfaces exist. All network address
resources are one of:

o a valid IPv4 address, optionally followed by "/" and a
prefix length;

o a valid IPv6 address, which must be followed by "/"
and a prefix length;

o a host name which resolves to an IPv4 address.
Note that hostnames that resolve to IPv6 addresses are not
supported.

The physical interface name is the network interface name.

A zone can be configured to be either exclusive-IP or shared-IP.
For a shared-IP zone, both the physical and address properties
must be set. For an exclusive-IP zone, the physical property must
be set and the address property cannot be set.


rctl

It also verifies that any defined resource control values are
valid on the current machine. This means that the privilege level
is privileged, the limit is lower than the currently defined
system value, and that the defined action agrees with the actions
that are valid for the given resource control.


EXAMPLES


Example 1: Using the -m Option




The following command illustrates the use of the -m option.


# zoneadm boot -- -m verbose


Example 2: Using the -i Option




The following command illustrates the use of the -i option.


# zoneadm boot -- -i /sbin/init


Example 3: Using the -s Option




The following command illustrates the use of the -s option.


# zoneadm boot -- -s


EXIT STATUS


The following exit values are returned:

0

Successful completion.


1

An error occurred.


2

Invalid usage.


ATTRIBUTES


See attributes(5) for descriptions of the following attributes:


+--------------------+-----------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+--------------------+-----------------+
|Interface Stability | Committed |
+--------------------+-----------------+

SEE ALSO


read(1), svcs(1), zlogin(1), zonename(1), init(1M), kernel(1M),
svcadm(1M), svc.startd(1M), svc.startd(1M), zonecfg(1M), libuuid(3LIB),
attributes(5), brands(5), native(5), smf(5), zones(5)

NOTES


The zones(5) service is managed by the service management facility,
smf(5), under the service identifier:

svc:/system/zones:default


Administrative actions on this service, such as enabling, disabling, or
requesting restart, can be performed using svcadm(1M). The service's
status can be queried using the svcs(1) command.


May 13, 2017 ZONEADM(1M)