PKGADD(1M) Maintenance Commands PKGADD(1M)


NAME


pkgadd - transfer software packages to the system

SYNOPSIS


pkgadd [-nv] [-a admin] [-G] [ [-M] -R root_path]
[-r response] [-V fs_file]
[-d device | -d datastream pkginst | all]
[pkginst | -Y category [, category]...]


pkgadd -s [-d device | -d datastream pkginst | all]
[pkginst | -Y category [, category]...]


DESCRIPTION


pkgadd transfers the contents of a software package from the distribution
medium or directory to install it onto the system. Used without the -d
device source specifier, pkgadd looks in the default spool directory
(/var/spool/pkg) for the package. Used with the -s option, it writes the
package to a spool directory instead of installing it.


The pkgadd utility requires an amount of temporary space the size of the
package that is being installed. pkgadd determines which temporary
directory to use by checking for the existence of the $TMPDIR environment
variable. If $TMPDIR is not defined, pkgadd uses P_tmpdir from stdio.h.
P_tmpdir has a default of /var/tmp/.


Certain unbundled and third-party packages are no longer entirely
compatible with the latest version of pkgadd. These packages require user
interaction throughout the installation and not just at the very
beginning, or require that their request scripts be run as the root user.


To install these older packages (released prior to Solaris 2.4), set the
following environment variable: NONABI_SCRIPTS=TRUE


As long as this environment variable is set, pkgadd permits keyboard
interaction throughout the installation and package request scripts are
run as root.


If you have package request scripts that require running as user root
(instead of noaccess [the default] or user install), use the rscript_alt
parameter in the admin(4) file to make an appropriate selection. See
admin(4).


Note that, in Solaris 8 and Solaris 9, the default user when running a
request script was either root or nobody, depending on the operating
system's patch level. In the current release, the default user is
noaccess.


When running pkgadd in the global zone (see zones(5)), a package that
contains a request script (see pkgask(1M)) is added only to the global
zone. The package is not propagated to any current or yet-to-be-installed
non-global zone. This behavior mimics the effect of the -G option,
described below.


Package commands are largefile(5)-aware. They handle files larger than 2
GB in the same way they handle smaller files. In their current
implementations, pkgadd, pkgtrans(1) and other package commands can
process a datastream of up to 4 GB.


The -d, -Y, and pkginst arguments shown in the SYNOPSIS are described
under OPERANDS, following OPTIONS.

OPTIONS


The supported options are described as follows. The -d device source
specifier is described under OPERANDS, below.

-a admin

Define an installation administration file, admin, to be used in
place of the default administration file. The token none overrides
the use of any admin file, and thus forces interaction with the user.
Unless a full path name is given, pkgadd first looks in the current
working directory for the administration file. If the specified
administration file is not in the current working directory, pkgadd
looks in the /var/sadm/install/admin directory for the administration
file.


-G

Add package(s) in the current zone only. When used in the global
zone, the package is added to the global zone only and is not
propagated to any existing or yet-to-be-created non-global zone. When
used in a non-global zone, the package(s) are added to the non-global
zone only.

This option causes package installation to fail if, in the pkginfo
file for a package, SUNW_PKG_ALLZONES is set to true. See pkginfo(4).


-M

Instruct pkgadd not to use the $root_path/etc/vfstab file for
determining the client's mount points. This option assumes the mount
points are correct on the server and it behaves consistently with
Solaris 2.5 and earlier releases.


-n

Installation occurs in non-interactive mode. Suppress output of the
list of installed files. The default mode is interactive.


-r response

Identify a file or directory which contains output from a previous
pkgask(1M) session. This file supplies the interaction responses that
would be requested by the package in interactive mode. response must
be a full pathname.


-R root_path

Define the full path name of a directory to use as the root_path. All
files, including package system information files, are relocated to a
directory tree starting in the specified root_path. The root_path may
be specified when installing to a client from a server (for example,
/export/root/client1).

Note -

The root file system of any non-global zones must not be referenced
with the -R option. Doing so might damage the global zone's file
system, might compromise the security of the global zone, and might
damage the non-global zone's file system. See zones(5).


-s spool

Write the package into the directory spool instead of installing it.


-v

Trace all of the scripts that get executed by pkgadd, located in the
pkginst/install directory. This option is used for debugging the
procedural and non-procedural scripts.


-V fs_file

Specify an alternative fs_file to map the client's file systems. For
example, used in situations where the $root_path/etc/vfstab file is
non-existent or unreliable.


When executed without options or operands, pkgadd uses /var/spool/pkg
(the default spool directory).

OPERANDS


The following operands are supported:

Sources


By default, pkgadd looks in the /var/spool/pkg directory when searching
for instances of a package to install or spool. Optionally, the source
for the package instances to be installed or spooled can be specified
using:

-d device
-d datastream pkgname,... | all

Install or copy a package from device. device can be any of the
following:

o A full path name to a directory or the identifiers for
tape, floppy disk, or removable disk (for example,
/var/tmp or /floppy/floppy_name).

o A device alias (for example, /floppy/floppy0).

o A datastream created by pkgtrans (see pkgtrans(1)).
The second form of the -d specifier, above, indicates the syntax you
use when specifying a datastream. In this case you must specify
either a comma-separated list of package names or the keyword all.


Instances


By default, pkgadd searches the specified source, and presents an
interactive menu allowing the user to select which package instances
found on the source are to be installed. As an alternative, the package
instances to be installed can be specified using:

pkginst

The package instance or list of instances to be installed. The token
all may be used to refer to all packages available on the source
medium. The format pkginst.* can be used to indicate all instances of
a package.

The asterisk character (*) is a special character to some shells and
may need to be escaped. In the C-Shell, the asterisk must be
surrounded by single quotes (') or preceded by a backslash (\).


-Y category[,category...]

Install packages based on the value of the CATEGORY parameter stored
in the package's pkginfo(4) file. All packages on the source medium
whose CATEGORY matches one of the specified categories will be
selected for installation or spooling.


EXAMPLES


Example 1: Installing a Package from a Solaris DVD




The following example installs a package from a Solaris DVD. You are
prompted for the name of the package you want to install.


example# pkgadd -d /cdrom/cdrom0/s0/Solaris_10/Product


Example 2: Installing a Set of Packages from a Datastream




The example command shown below installs all of the packages in the
datastream specified by the -d source specifier. Prior to this command,
this datastream must have been created with the pkgtrans(1) command.


example# pkgadd -d /var/tmp/datastream all


The keyword all specifies that all of the packages found in the
designated datastream will be installed.


EXIT STATUS


0

Successful completion


1

Fatal error.


2

Warning.


3

Interruption.


4

Administration.


5

Administration. Interaction is required. Do not use pkgadd -n.


10

Reboot after installation of all packages.


20

Reboot after installation of this package.


FILES


/var/sadm/install/logs/

Location where pkgadd logs an instance of software installation.


ATTRIBUTES


See attributes(5) for descriptions of the following attributes:


+--------------------+-----------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+--------------------+-----------------+
|Interface Stability | Evolving |
+--------------------+-----------------+

SEE ALSO


pkginfo(1), pkgmk(1), pkgparam(1), pkgproto(1), pkgtrans(1),
installf(1M), pkgadm(1M), pkgask(1M), pkgchk(1M), pkgrm(1M), removef(1M),
admin(4), pkginfo(4), attributes(5), largefile(5), zones(5)


NOTES


When transferring a package to a spool directory, the -r, -n, and -a
options cannot be used.


The -r option can be used to indicate a directory name as well as a
filename. The directory can contain numerous response files, each sharing
the name of the package with which it should be associated. This would be
used, for example, when adding multiple interactive packages with one
invocation of pkgadd. In this situation, each package would need a
response file. If you create response files with the same name as the
package (for example, pkinst1 and pkinst2), then name the directory in
which these files reside after the -r.


The -n option causes the installation to halt if any interaction is
needed to complete it.


If the default admin file is too restrictive, the administration file may
need to be modified to allow for total non-interaction during a package
installation. See admin(4) for details.


March 2, 2017 PKGADD(1M)