DISKINFO(1M) Maintenance Commands DISKINFO(1M)
- provide disk device inventory and status
The diskinfo tool provides information about the disk devices in the
system. Because it interacts with the kernel's device management
subsystem, this tool can be used only from the global zone. If run in any
other zone, its output will be incomplete and unreliable.
There are three main modes. The default mode, when neither the -c
option is specified, provides a basic inventory of the disk devices in the
system. Each line describes a single device and contains the device's
attachment bus or fabric type, the base name of the device in the /dev/dsk
directory, the disk's vendor and product identification strings, the size
(storage capacity) of the device, whether the device is removable, and
whether it is solid-state.
option selects physical mode. In this mode, each line of output
likewise describes one disk device; however, the fields provided indicate
the base name of the device in the /dev/dsk
directory, the disk's vendor
and product identification strings, the serial number of the device,
whether the device is faulty as diagnosed by fmd(1M)
, whether the locate or
identification indicator is on for the device (if one is present), and the
chassis and bay number containing the disk if known.
option selects compact mode. This mode provides all of the
information provided by both the default mode and physical mode in a
See OUTPUT FIELDS
below for a detailed description of each column.
Select compact mode output. At most one of -c
present on the command line. -H
Do not print a header. This provides output suitable for passing
into text processing tools. -P
Select physical mode output. At most one of -P
present on the command line. -p
Parsable output. When -p
is selected, the size (storage capacity)
is output in bytes instead of in human-readable units, and the
device's location (if known) is provided as a comma-separated
chassis and bay number instead of a human-readable location. This
option may be used in any output mode and is intended for use by
scripts or other robotic tooling.
OUTPUT FIELDS DISK
The base name of the device node within the /dev/dsk
The names of partitions and/or slices, if any, are derived from
this name as described by prtvtoc(1M)
This field is available in all output modes. FLRS
A condensed field incorporating the same information as the FLT
, and SSD
fields. Each field is condensed to a single
character. If the field is true, the first letter of the field
name will appear in its position in the string; otherwise, the
" character will appear instead.
This field is available only in compact output mode. FLT
A boolean field indicating whether the device is faulty;
specifically, whether the fault indicator (if one is present) is
This field is available only in physical output mode. LOC
A boolean field indicating whether the locate or identify
indicator, if any, associated with the device's bay, is active.
This field is available only in physical output mode. LOCATION
The physical chassis and bay name (or chassis and bay numbers, if -p
is given) in which the device is located. The chassis number
is identified in human-readable output within [square brackets];
chassis 0 is the host chassis itself. The bay name, if any, is
provided by the enclosure, typically via a SCSI Enclosure
This field is available in compact and physical output modes. PID
The product identification string reported by the device.
This field is available in all output modes. RMV
A boolean field indicating whether the device is removable. USB
storage devices, most optical drives and changers, and certain
other devices that report themselves as removable will be
identified as such.
This field is available only in default output mode. SERIAL
The serial number of the device. The entire serial number is
reported if the device and its drivers provide it.
This field is available in compact and physical output modes. SIZE
The device's storage capacity. If the -p
option is given, this
is reported in bytes; otherwise, it is reported in a human-
readable format with units specified. All units are based on
powers of 2 and are expressed in SI standard notation.
This field is available in compact and default output modes. SSD
A boolean field indicating whether the device is solid-state.
This field is available only in default output mode. TYPE
The transport (fabric or bus) type by which the storage device is
attached to the host, if known. Typical transports include SCSI
This field is available in compact and default output modes. VID
The vendor identification string reported by the device.
This field is available in all output modes.
SEE ALSO fmd(1M)
illumos July 20, 2016 illumos